Lighting practice

Louis Poulsen Table Lamps and B2B Lighting: A Procurement FAQ for Evaluating Spotlight Manufacturers and OEM Track Lighting

I manage purchasing for a 310-person company. I'm not an interior designer or an electrical engineer—I'm the one who gets asked to source lighting, justify the spend, and make sure it doesn't become a problem a year later. If you've looked at a Louis Poulsen table lamp spec sheet and wondered why supplier prices range from "designer original" to "factory direct," this FAQ is for you. These are the questions I ask before I approve any lighting vendor.

Skip to the section you need.

Should we buy authentic Louis Poulsen fixtures or Louis Poulsen-style ones?

It depends on the project. If the architect specifies an authentic Louis Poulsen PH Artichoke for a lobby, that's a design decision, not a purchasing decision. We respect that. But a lot of commercial lighting decisions are about visual style—the clean Scandinavian look, the soft glow of a Louis Poulsen AJ floor lamp—without the original price tag or lead time.

When I source Louis Poulsen-style fixtures, I'm clear about what that means: inspired by the silhouette, not an exact replica. The finish, materials, and light distribution will have differences. I learned this in 2023 when a designer was disappointed that the dimmer on a style fixture wasn't in the same location as the original. The fixture was fine; the problem was my assumption that "style" was enough without explaining the details.

If the spec requires the authentic piece, buy from an authorized dealer. If the project needs budget and volume, find a supplier who's upfront about the difference. That transparency protects everyone.

Why is there such a big price gap between Louis Poulsen table lamp suppliers?

Same silhouette doesn't mean same product. For a Louis Poulsen-style table lamp, the price difference usually comes down to materials and construction: glass or acrylic, real brass or plated steel, the quality of the LED driver, the diffuser, even the packaging.

I remember reviewing a quote that looked about 18% lower than the next one. It wasn't until I asked about the driver that I discovered it wasn't UL-listed. "We can upgrade it" sounded helpful, but the upgrade brought the total above the competitor's quote. The lower base price disappeared once I paid for the required extras.

Now I ask for a line-item breakdown before comparing totals. If a supplier lists every component and fee upfront, that's a promising sign. If they say "don't worry, we'll sort it out" when I ask about certifications, I move on.

What should I check when evaluating a spotlight manufacturer?

Ask for photometric data first. An IES or LDT file tells you beam spread and candela distribution, and it's the closest thing to a guarantee that the fixture matches the spec. I used to skip it, thinking any spotlight would work. Then I approved a batch of track heads for a reception area, and the first round looked like flashlights pointed at a white wall—the beam angle was much narrower than the sample.

A few things I verify now:

  • IES/LDT file for the exact model, not a "similar" one.
  • CRI at the color temperature we plan to order.
  • Driver brand and whether it's replaceable.
  • Warranty terms and what's covered.

If a manufacturer can't provide these documents in the first email, that's not a warning—it's a stop sign. The suppliers who care about long-term relationships send specs before I ask.

What does track lighting OEM actually involve?

OEM means you're selling the fixture under your own brand or specifying it for a project. It's not a magic button that turns a sketch into a finished product. The factory handles manufacturing, but you still own the important decisions: which track system it works with (2-circuit or 3-circuit), driver type, beam angles, finishes, packaging, and labeling.

What surprises people is that OEM is about control, not just cost. You're deciding whether the product meets your market's electrical standards, whether the warranty is manageable, and whether spare parts will exist in five years. If you send your logo to a factory and stop there, you might find out later they changed the LED chip without telling you.

I treat an OEM partner as an extension of our purchasing team, not a random supplier. We document changes, approve samples, and check for spec drift between the pre-production sample and the mass production run.

How to evaluate recessed lighting manufacturers?

Start with compliance, not aesthetics. For U.S. projects, I want UL/ETL listing for the fixture and the driver. For Canada, cUL/CSA might apply. The inspector will care about this even if you don't.

Then ask for LM-80 data and LM-79 reports. Those are the LED testing standards for lumen depreciation and total light output. A supplier who can't explain those two standards should stay on your maybe list, not your shortlist.

In 2021, I ordered surface-mount downlights for a corridor without checking the IP rating. The space wasn't supposed to be wet, but humidity still got high enough in summer that the drivers started buzzing within a year. The vendor replaced them, but the disruption was on me. Now I ask about IP rating even for indoor fixtures—not because it's always required, but because the answer tells me how much the manufacturer thinks about real-world installation.

What hidden costs should I look for in lighting RFQs?

Start with tooling, minimum order quantity, carton quantity, partial shipment fees, customs, duties, repackaging, and warranty replacement shipping. The base price rarely includes everything.

"Free shipping" is the quote line I'm most suspicious of. One vendor offered free shipping, then added an unloading fee because pallets had to be hand-stacked in our freight elevator instead of a loading dock. The invoice arrived with a $350 line item that nobody mentioned at the quote stage.

I've learned to ask "what's NOT included?" before asking "what's the price?" It sounds backwards, but a quote that lists every fee upfront—even when the total looks higher—usually costs less than one that surprises you later.

How do I explain to management that the cheapest quote isn't always the best?

I frame it as total cost, not unit price. A $4 downlight with $2 extra packaging and a $1.50 restocking fee is $7.50 delivered. A $5.50 downlight with clear bulk pricing is $5.50 full stop. The second one is cheaper once you add your extras, but you need a line-item quote to see it.

During our 2024 vendor consolidation project, I was pressured to accept a lower bid for LED panel lights. The unit cost was about 15% less than our current supplier. But the new factory required a full container order, so we rented storage. Adding storage and rebooking delivery, the savings almost disappeared. I had to walk into finance and admit that my own cost-saving recommendation didn't pan out.

Now I give management two numbers: the quote total and the all-in total. It's harder to argue with the all-in number because it includes the risks nobody asked about.

Clara Whitmore

Clara Whitmore

Clara Whitmore is a lighting photometry and LED source analyst specializing in bulbs, tubes, strips, panels, and integrated luminaires. She interprets IES LM-79 measurements and TM-30 color rendition data through luminous flux, efficacy, intensity distribution, CCT, chromaticity, fidelity, and gamut metrics. She writes evidence-led comparisons for specifiers selecting source formats and luminaires for commercial interiors, industrial spaces, or horticultural systems where measured optical and color performance matter.