The Bottom Line
If you only remember one thing from this article, make it this: the fixture you buy is not the thing that determines whether it works. The driver does. And every LED light you buy—from a $40 desk lamp to a lobby statement chandelier to the ViparSpectra P1000 grow light by the break room—will come with one of two driver types: constant current or constant voltage. They are not interchangeable, and most spec sheets don't tell you which one you're getting.
Everything I'd read about buying LED lighting said to focus on lumens, wattage, color temperature, CRI. That's not where my problems came from. In five years of managing facilities purchasing, every single time something went wrong, it was the driver. Every time.
Why I'm Not Just an Armchair Buyer
I'm the office administrator for a 38-person company. Since 2020, I've handled all our facilities ordering—roughly $180,000 a year across eight vendors. I report to both operations and finance. Conference room lights, lobby lighting, event lighting, and the plant lighting for common areas—all of that goes through me.
I'm not an electrician. But I've made enough mistakes to know what to ask before I sign a PO.
Let's Get the Terms Straight
Constant current drivers put out a fixed current (in amps) and adjust voltage to match the load. You wire fixtures in series, and the current is equal across every fixture, so brightness stays consistent.
Constant voltage drivers put out a fixed voltage (usually 12V or 24V) and let the current vary with the load. You wire in parallel, and usually each fixture has its own tiny driver built in to handle that fixed voltage.
That difference—constant current LED driver vs constant voltage—is not a niche detail. It dictates how the fixtures wire up, what kind of dimmer you need, and whether two fixtures from different vendors can share the same circuit. That last one has burned me.
Three Very Specific Things That Taught Me This
1. The Statement Chandelier
We installed a statement chandelier in the lobby in February 2024—three-foot diameter, a floating ring of LEDs. The electrician read the spec sheet, saw "LED compatible, dimmable," and wired it to the existing dimming circuit.
Three weeks later, four of the light segments started flickering. A week after that, they were dead.
The electrician came back, opened the box, and said the words I now repeat to myself before any lighting purchase: "This one's constant current. Your dimmer is constant voltage." The chandelier itself was fine. The spec didn't say which driver it needed. That cost us $1,100 in labor and rewiring—plus two weeks of explaining to my VP why the lobby was half-lit.
2. The Borrowed Spotlight
Worse moment (ugh): company annual meeting last fall. Our lobby lighting was in transition, and I didn't want to buy a new spotlight with the event budget nearly drained. So I borrowed one from our event supplier. The borrowed spotlight ran on a 12V constant voltage driver. Our lobby controller was constant current.
We spent an entire afternoon with adapters, temporary wiring, and one very patient facilities colleague trying to make the borrowed spotlight talk to our system. The event happened, but the lobby looked like a flea market. The supplier was gracious and didn't charge us (thankfully). But I wrote myself a note that I've taped inside my PO folder: verify driver type before borrowing anything.
3. The Office Green Wall
Our brand team wanted a plant wall beside the break room. This time I was the one asking the questions upfront. We looked at the viparspectra par 600 and the viparspectra p1000 grow light—two models our supplier had suggested for medium and small growing areas, respectively.
The first question out of my mouth was not about wattage or coverage. It was: "What kind of driver does this use, constant current or constant voltage?" The first vendor's rep wasn't sure—which, for me, is a deal-breaker. I moved on.
I also verified claims before trusting anything on the spec sheet. Per FTC guidelines (ftc.gov), advertising claims have to be truthful and substantiated. So when the second vendor promised specific PAR and lumen numbers for their LED grow lights, I asked for independent test reports. No report, no order. Brand name didn't matter.
We ended up not going with the grow lights (the wall got moved to a spot with better natural light). But the process was right. I asked about the driver first, and that saved me from repeating the lobby chandelier mistake.
Small Orders Deserve the Same Questions
One thing I want to put on the record: the lobby chandelier was a small order—under $1,500 with parts and installation. The green wall lighting was also small. But the vendor who took my $200 order seriously back in 2020 is the same one I still use for $20,000 orders. Vendors who treat small orders as a nuisance are, in my experience, the ones who disappear when something goes wrong.
That's true for lighting, too. A single fixture order is still worth asking detailed questions about. If a supplier won't answer a driver question on a $300 order, they probably won't answer it on a $30,000 order either.
When This Doesn't Apply (Honestly)
Not every lighting purchase needs this level of scrutiny. If you're buying plug-in fixtures—desk lamps, small decorative lights—the driver is usually sealed inside and you don't get a choice. If your electrician or contractor is handling the whole install, they should be managing the driver specs. But you can still ask which driver type they're using, just to have it on record.
Where it really matters is when you're assembling or specifying components yourself, or when a single failure will cost more than the fixture did in the first place. That's when you ask about the driver, and not just the fixture.
I wish I'd known this before the lobby chandelier. But the plant wall kept me from repeating the mistake—and the lobby has stopped flickering since. So there's that.
