-
Who this checklist is for
-
1. Ask for the light engine spec — not the shape
-
2. Request IES or LDT photometric files before you negotiate price
-
3. Pin down CCT and CRI tolerance in the contract
-
4. Check the finish under two light conditions — the step almost everyone skips
-
5. Insist on written tolerances for every dimensional spec
-
6. Ask for a sealed golden sample — and pay for it
-
7. Clarify after-sales component sourcing before you sign
-
Notes and common mistakes
Who this checklist is for
If you're sourcing pendant lights, table lamps, or ceiling fixtures for a hotel renovation, a restaurant rollout, or a private-label line you plan to put your own name on, this is for you. I'm not going to sell you anything here. I'm a quality and brand compliance manager, and I review fixtures before they reach our customers — roughly 2,000 pieces a year, give or take. In 2025 alone, I rejected close to 18% of first deliveries. Almost none of those rejections had anything to do with price.
What follows is the seven-point checklist I actually run through on every new order. Once you know what you're asking for, it takes about 20 minutes per supplier.
1. Ask for the light engine spec — not the shape
Every buyer asks "can you make it look like the PH 80?" Every single one. The shape is the easy part. The light engine is where quality actually lives.
What to request, in writing:
- LED maker and series (a specific Bridgelux, Cree, or Samsung line — not "high-quality LED")
- Measured lumen output at your chosen CCT, not calculated
- Driver brand and whether it's user-replaceable
- Rated life with an L70 or L80 threshold stated explicitly
- Beam angle verified against your spec, not the catalog photo
If a supplier can't name the driver, treat that as a stop sign. A decorative fixture is a housing. The engine and driver are the product.
2. Request IES or LDT photometric files before you negotiate price
When I first started in this role, I assumed photometric files were a nice-to-have — something you chase down after the samples arrive. Two projects later, I learned the opposite. The IES file tells you what the fixture actually does in a space. The catalog photo tells you what the marketing team wanted it to look like.
Ask for the file at the RFQ stage. A serious manufacturer will send it within a day. A trading company repackaging someone else's fixture will stall, send you a PDF, or send you a file that doesn't match the sample you eventually receive.
When you get the file, check:
- Does the beam angle in the file match the datasheet?
- Is the candela distribution consistent with how you plan to mount it?
- Do the lumens match at the color temperature you actually ordered?
3. Pin down CCT and CRI tolerance in the contract
"3000K" is not a specification. It's a category. Real lighting specs read like this:
CCT: 3000K ± 150K across the batch. CRI: Ra ≥ 90, R9 ≥ 50. Consistency verified by 3-piece batch sampling.
Without tolerance language, a supplier can deliver 2800K on Monday and 3200K on Friday and technically be within "3000K." I've seen exactly this — one 40-unit order of pendant lights where the north-facing units ran noticeably warmer than the south-facing ones in the same room. That's a spec gap, not a manufacturing defect. It cost the client a redo.
4. Check the finish under two light conditions — the step almost everyone skips
The conventional wisdom is to inspect samples under daylight or a 5000K task light. In practice, I've found that tells you almost nothing about how the fixture will look in a dim hotel suite, a warm restaurant, or a cool-toned retail floor.
Here's what I do, and I'd suggest you do it too:
- Look at the finish under 2700K warm light first — this is where brass reading lamps and powder-coat blacks genuinely live
- Then flip the same piece under 4000K neutral light
- Then hold it at a 45° angle near a window
Good powder coating and anodizing stay consistent across all three. Cheap spray finishes go orange under warm light and green under cool light. On a hotel project in 2024, this single test caught a finish batch that would have failed FF&E approval after installation — after shipping, after customs, after install labor. We caught it before the sample was approved.
5. Insist on written tolerances for every dimensional spec
Vendors love to say a batch is "within industry standard." That phrase has no teeth. Ask for it in numbers.
A reasonable prompt is: "Please confirm dimensional tolerance for the shade diameter, total height, and cable length. Our acceptance standard is ±2mm on shade diameter and ±5mm on total height."
I did this after a 500-unit order arrived with shade diameters that varied by 8mm — enough that they didn't visually match when hung as a row of three. The supplier had claimed "within industry standard." We rejected the batch, and they redid it at their own cost. Now every purchase order we issue includes dimensional tolerance language. It costs nothing to write and it saves a lot of arguments later.
6. Ask for a sealed golden sample — and pay for it
This is the one that separates serious wholesalers from the rest. A golden sample is a sealed, dated reference piece held by both parties, in both warehouses. It's not a photo. It's not a CAD file. It's a physical unit in a box.
When you place a repeat order six months later, that sample is your arbitration point. Without it, you're comparing production to memory — and memory is generous.
Pay for it. Any supplier that wants to "just send one for free" is signaling they don't want a paper trail. That's a fine arrangement for a one-off, and a bad one for a distributor relationship.
7. Clarify after-sales component sourcing before you sign
People forget this one until something breaks. Ask, in writing:
- Can we purchase replacement drivers separately?
- Can we purchase replacement LED boards separately?
- What's the minimum replacement part order?
- Are plastic or glass diffusers stocked for 3+ years?
If a designer-style table lamp loses its driver in year two, and the driver is potted and proprietary, the fixture is scrap. That's not a hypothetical — I've watched a commercial buyer replace 60 fixtures instead of 60 drivers because nobody asked this question at the RFQ stage.
Notes and common mistakes
Don't skip the RFQ questions because samples look good. Samples are hand-selected. Production is not. The gap between those two things is where quality lives.
Don't assume a famous shape equals a good build. Louis Poulsen-style table lamps, PH 80-inspired pieces, and designer-adjacent pendant lights are widely available from many wholesale suppliers. The visual match tells you nothing about the engine, the driver, or the finish chemistry.
Don't let price anchor the conversation before step 4. To be fair, price matters — budgets are real, and I get why buyers open with it. But it's straightforward to make the same shape cheaper. It's hard to make it the same shape and the same light at the same finish quality. Get the spec out of the way first, then talk numbers.
One more thing worth saying plainly: this worked for us, but we're a mid-size operation with a fairly consistent order cadence in residential and hospitality lighting. If you're running one-off customs or a wildly seasonal roll-out, the calculus is different — you may not want to hold golden samples, and you may not need photometric files for decorative-only fixtures. Your mileage will vary.
I'd rather spend an hour up front on these seven points than three weeks arguing about a rejected container. An informed buyer asks better questions and gets faster answers. That's the whole point.
